-
Some more ambilamp pictures
Here we go with a couple of new pictures of the ambilamp project. First one is the box where the arduino resides. It’s just a simple box that you can buy in any electronics shop.
I added a switch for being able to turn off the lamp without unplugging it from the mains. Note that every project must use at least a piece of duct tape to be considered a real hardware hacking project
And the second is the same box, opened
You can see the mini-shield that I made to set the transistor bridge and solder the wires that go to the lamp. And the conector I used to connect the switch to the arduino board (you won’t be able to do it this way if you are using the newer arduino duemilanuove, as it doesn’t have anymore the jumper to switch the power supply):
